Other Status Read Command; Cr_Status Command; Cr_Signal Command; Cr_Vmute Command - Canon LV-7392A Command List

LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M

9.12 Other Status Read Command

9.12.1 CR_STATUS Command

Command "CR_STATUS"(CR)
Get status of Projector behavior.
Details This command affects the same as "CR0" of Basic Serial command, but this has
an error code.
Acceptable
Response
Unacceptable

9.12.2 CR_SIGNAL Command

Command "CR_SIGNAL"(CR)
Details Get Signal status if there is signal or not
Acceptable
Response
Unacceptable

9.12.3 CR_VMUTE Command

Command "CR_VMUTE"[CR]
Details Get setting status of No Show
Acceptable
Response
Unacceptable

9.12.4 CR_FREEZE Command

Command "CR_FREEZE"[CR]
Details Get setting status of Freeze
Acceptable
Response
Unacceptable
"000_%1"[CR]
"00"= Power ON
"80"= Stand by
"40"= Count down
"20"= Cooling down
"10"= Power failure
%1 "28"= Cooling down due to abnormal temperature
"88"= Stand by after Cooling down
"24"= Power saving cooling down
"04"= Power saving
"21"= Cooling down due to Lamp failure
"81"= Stand by after Cooling down due to Lamp failure
"Error Code"[CR]
"000_%a"[CR]
"ON" ------------------------ Signal is found
%a
"OFF" ----------------------- There is no signal
"Error Code" [CR]
"000_%a"[CR]
"ON" -------- Blank is ON
%a
"OFF" ------- Blank is OFF
"Error Code" [CR]
"000_%a"[CR]
"ON" ---------------------- Freeze is ON
%a
"OFF" --------------------- Freeze is OFF
"Error Code" [CR]
-65-
Expand Serial Command Functional Specifications