LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
9.11.19 CR_RCODE Command
Command
"CR_RCODE"[CR]
Details
Get selected Remote Control Code
Acceptable
Response
%a
Unacceptable
9.11.20 CR_SECURITY Command
Command
"CR_SECURITY" [CR]
Details
Get Security Mode setting status
Acceptable
Response
%1
Unacceptable
9.11.21 CR_KEYDIS Command
Command
"CR_KEYDIS"(CR)
Details
Get disability status of RC/Projector keys (valid or invalid)
Acceptable
Response
%a
Unacceptable
9.11.22 CR_PJLOCKNOW Command
Command
"CR_PJLOCKNOW" [CR]
Details
Get if PJ lock is actually in operation
Acceptable
Response
%1
Unacceptable
9.11.23 CR_PJLOCKMENU Command
Command
"CR_PJLOCKMENU" [CR]
Details
Get status of PJ Lock on Menu
Acceptable
Response
%1
Unacceptable
Expand Serial Command Functional Specifications
"000_%a"[CR]
"001" --------------------------- Code1 is selected
"002" --------------------------- Code2 is selected
"Error Code" [CR]
"000_%1[CR]
"ON" ------------- PJ Lock setting on Menu is ON-1 or ON-2
"OFF" ------------PJ Lock setting on Menu is OFF
"Error Code" [CR]
"000_%a"[CR]
"NONE" -------------------------- RC / Projector keys are valid
"RC" ------------------------------ RC keys are invalid
"KEY" ----------------------------- Projector keys are invalid
"Error Code" [CR]
"000_%1[CR]
"LOCK" ------------- PJ Lock is in operation. PJ Lock status is ON-1
or ON-2 on Menu, and PJ PIN CODE is not
entered so that projector is actually locked.
"FREE" ------------- PJ Lock is released. PJ Lock status is OFF, or,
status is ON-1 or ON-2 on Menu but PJ PIN
CODE is entered correctly so that PJ Lock is
released.
"Error Code" [CR]
"000_%1[CR]
"ON1" ------------- PJ Lock status is On-1
"ON2" ------------- PJ Lock status is On-2
"OFF" ------------- PJ Lock status is OFF
"Error Code" [CR]
-62-