Kyocera FS-2100DN Management Manual page 5

Using a Web Browser to Manage the IB-51
Auto Wireless Setup Feature
Wireless LAN Basic
Configuration
WEP Configuration
WPA/WPA2 Configuration
file:///C:/Tom/PDF/IB-51/IB-51%20Setup%20Guide%20HTML%20English/card_homepa...
PIN-Code
Wireless Mode
SSID
Wireless Authentication
Channel
WEP
WEP Key
Encryption Mode
Pre-Shared Key
Authentication Protocol
EAP User Name
EAP Password
Internal Authentication Method
Server Authentication
Import CA Certificate
Import Client Certificate
Automatic PAC File
Distribution
Clicking "Auto Generate" will generate the IB-51's PIN code.
Select from below the method of connection to the IB-51's
wireless network.
Infrastructure
—
AdHoc
—
Set the SSID of the wireless LAN to connect the IB-51.
Configure the authentication method used when connecting to
the wireless LAN router (access point).
Open
—
Shard
—
WPA
—
WPA2
—
WPA Enterprise
—
WPA2 Enterprise
—
Set the channel used by wireless LAN.
Enable (On) or disable (Off) the WEP encryption feature.
Set the encryption key (WEP key) used for WEP encryption.
Select from below the wireless encryption method to use.
When WPA2/WPA2 Enterprise is set as the wireless
authentication method, this is fixed at AES.
TKIP
—
AES
—
AUTO
—
Only when WPA/WPA2 is selected, enter the shared key.
When WPA Enterprise/WPA2 Enterprise is selected, this cannot
be set.
Select from below the authentication protocol.
PEAP
—
EAP-TLS
—
EAP-TTLS
—
EAP-FAST
—
Enter the EAP user name.
Only when EAP-TTLS/PEAP/EAP-FAST is selected, enter the
EAP password.
Only when EAP-TTLS/PEAP is selected, specify from the
following protocols.
When set to PEAP, this is fixed at MSCHAPv2.
PAP
—
CHAP
—
MSCHAP
—
MSCHAPv2
—
Enables (On) or disables (Off) the server authentication, when
EAP-TLS/EAP-TTLS/PEAP is selected for the authentication.
Imports the CA certificate when EAP-TLS/EAP-TTLS/PEAP is
selected for the authentication.
Imports the client certificate, when EAP-TLS is selected for the
authentication.
Enables (On) or disables (Off) the automatic configuration of the
PAC file, when EAP-FAST is selected for the authentication.
Page 5 of 22
10/2/2012