Kyocera FS-2100DN Management Manual page 16

Using a Web Browser to Manage the IB-51
Write Community
sysContact
sysName
sysLocation
HP Web Jetadmin
Compatibility
4-16. Management/E-mail > SNMP > Trap
If you are using the SNMP protocol and an error such as paper out occurs, the IB-51 generates a trap and sends it to the trap
recipients. You can setup two trap recipients. The setting details are the same for both recipients.
Item
Authentication Traps
Trap Community
Trap IP Address (IPv4/IPv6)
Trap IPX Address
Selected Errors
4-17. Management/E-mail > LDAP
The IB-51 can refer to the LDAP server.
Item
LDAP Settings
Shared Address Book
file:///C:/Tom/PDF/IB-51/IB-51%20Setup%20Guide%20HTML%20English/card_homepa...
This setting functions similarly to the read community setting except that it is used for SNMP
requests to write values.
This is the MIB-II sysContact object, which typically contains the email address of the network
administrator.
This is the MIB-II sysName object, which typically contains the host name or domain name of the
IB-51.
This is the MIB-II sysLocation object, which typically contains information about the location of the
IB-51.
Enables (YES) or disables (NO) compatibility with HP Web Jetadmin.
Description
Enables (On) or disables (Off) the MIB-II EnableAuthenTrap object. If this setting is enabled (On),
an SNMP trap is generated if an attempt is made to read or write using an invalid community
string. The trap is sent to the contained trap address.
The SNMP trap community string used when the IB-51 generates a trap.
The IP address that receives traps.
The IPX address that receives traps.
Select the events that generate traps from Low Toner, Add Toner, Paper Jam, Add Paper,
Cover Open, and All Other Errors.
LDAP
LDAP Encryption
LDAP Server Name
LDAP Port Number
Search Timeout
Login User Name
Login Password
Description
Enable (on) or disable (off) the LDAP server.
Selects the type of encryption according to the type of security
employed by the LDAP server. Select Off when encryption is not
used.
LDAPv3/TLS
—
LDAP over SSL
—
Off
—
To activate the configuration, the
—
to be set to ON.
Specifies a name or IP address for the LDAP server.
Specifies a port number for LDAP or use the LDAP default port
389.
Specifies a period of time for searching the LDAP server.
Specifies the user name.
Specifies the password.
Page 16 of 22
Encryption needs
10/2/2012