Troubleshooting - Kyocera FS-2100DN Management Manual

Using a Web Browser to Manage the IB-51
The model name and firmware version can be seen.
Item
Model
Version

5. Troubleshooting

If problems occur when using the IB-51's Web page, investigate the following items and take the appropriate action. If the problem
persists, contact your dealer or an authorized service center.
Problem
Cannot access the IB-51's
Web page
The text of the IB-51's Web
page does not display
properly.
Cannot access the General
Settings Page or Advanced
Page.
The settings I made are not
registered.
I forgot the administrator
password.
Top of page
file:///C:/Tom/PDF/IB-51/IB-51%20Setup%20Guide%20HTML%20English/card_homepa...
Description
Shows the model name.
Shows the firmware version.
Check point
Are the IB-51 wireless LAN
settings correct?
Is the IP address of the IB-51
entered correctly?
Are the web browser settings
correct?
Has the administrator set up
an IP Filter function?
Is the web browser version
supported by the IB-51's Web
page?
Is the web browser version
supported by the IB-51's Web
page?
Has the administrator set a
password? If so, you must
enter it.
Did you click the Submit
button, after entering the
settings?
Action
Check the IB-51 wireless LAN settings.
Enter the correct IP address. Ask the network administrator to
verify that the IB-51 is configured with the correct IP address.
If the web browser connects via a proxy server, check the proxy
settings. For details, see the web browser Help.
Access the IB-51's Web page from an approved IP address.
Use a web browser verified to work with the IB-51's Web page.
Use a web browser verified to work with the IB-51's Web page.
Enter the correct administrator password.
After making the desired settings of IB-51, click the Submit
button.
The administrator password can be cleared by restoring the IB-
51 settings to the factory default settings using the procedure
described in Resetting to Factory
Page 22 of 22
Defaults.
10/2/2012