Kyocera FS-2100DN Management Manual page 11

Using a Web Browser to Manage the IB-51
Item
FTP Client
FTP Client Port Number
FTP Client over SSL
CIFS
4-7. Protocols > NetWare > General
This print system supports both NDS and bindery printing in either printer server mode or remote printer mode.
To set up NetWare, client software must be installed and you must be logged on with administrator rights. Consult your network
administrator for assistance.
Printing with NetWare is supported with Novell or Microsoft NetWare Client as the client.
Network operations such as creating the queue require admin, supervisor, or equivalent rights.
Item
NetWare Protocol
Bindery Mode
Frame Type
NDS Tree
NDS Context
Print Server Mode
Print Server Name
Queue Polling Interval
Banner Page Requests
Password (Optional)
Remote Printer Mode
Printer Name
Job Timeout
4-8. Protocols > NetWare > Bindery Services
You can register the file server in print server mode and the print server in remote printer mode that are connected by the print system.
If none are registered, network discovery is performed at startup, and the first servers (up to eight) are automatically connected.
file:///C:/Tom/PDF/IB-51/IB-51%20Setup%20Guide%20HTML%20English/card_homepa...
Description
Enables (On) or disables (Off) the FTP client.
Sets the FTP Port Number. (Default port: 21)
Encrypts using SSL. Select "OFF" to not use it.
OFF
—
StartTLS
—
FTP Client over SSL
—
To activate the configuration, the
—
Enables ( On ) or disables ( Off ) the CIFS Protocol.
Description
Choose whether NetWare protocol is enabled (On) or disabled (Off).
Choose whether bindery mode is enabled (On) or disabled (Off).
Choose from four supported four frame types: 802.2, SNAP, ETHERNET-II, and 802.3. You can
also choose auto-detect.
Designate the name of the NDS tree for the connection.
Designate the NDS context for connections in print server mode.
Choose whether print server mode is enabled (On) or disabled (Off).
Shows the print server name.
The polling interval can be designated.
Choose whether to print banner page when printing in print server mode.
A password can be designated as desired. Login requires that the password here match the print
server password set by the NetWare utility.
Choose whether remote printer mode is enabled (On) or disabled (Off).
Shows the print server name.
Set the timeout value to complete jobs in remote printer mode in a range of 4 to 255 seconds.
Encryption needs to be set to ON.
Page 11 of 22
10/2/2012