Kyocera FS-2100DN Management Manual page 12

Using a Web Browser to Manage the IB-51
After system startup, the system conducts polling at regular intervals to connect to servers automatically even when registered file
servers are running.
Item
Print Server Mode
Remote Printer Mode
4-9. Protocols > AppleTalk
This print system supports Mac OS. (See 1-1.
AppleTalk networks, activate AppleTalk protocol.
Item
AppleTalk
Printer Name
Zone Name
4-10. Protocols > NetBEUI/NetBIOS
Print systems connected via NetBEUI are registered in Windows in My Network.
Item
NetBEUI Protocol
NetBIOS over TCP/IP
Browse Master
Printer Name
Workgroup
Comment
4-11. Management/E-mail > SMTP > General
The IB-51 can notify registered users by e-mail when the toner is running out, or send other information. SMTP is used for this feature.
You must configure the SMTP protocol settings before the IB-51 can connect to an SMTP server.
Item
SMTP Protocol
file:///C:/Tom/PDF/IB-51/IB-51%20Setup%20Guide%20HTML%20English/card_homepa...
Description
Up to eight file servers can be registered. If there are nine or more file servers, register the priority
file server names. If none are registered, up to eight servers are automatically connected at
startup. However, print server names in the file server must match IB-51 print server names.
Up to eight print servers can be registered. If there are nine or more print servers, register the
priority print server names. If none are registered, up to eight servers are automatically connected
at startup. However, printer/MFP names (printer port names) in the print server must match IB-51
remote printer names (printer port names). Even if registered file servers are started after the IB-
51, the IB-51 regularly conducts polling so they will be automatically connected.
Compatible Systems) and is compatible with LaserWriter driver version 8.x. To print in
Description
Choose whether AppleTalk protocol is enabled (On) or disabled (Off).
Identifies printers/MFPs in the AppleTalk network.
Identifies the AppleTalk zone (network). An asterisk (*) here indicates the default zone.
Description
Choose whether NetBEUI protocol is enabled (On) or disabled (Off).
Enables (On) or disables (Off) NetBIOS over TCP/IP. When this setting is on, NetBIOS can be
used in a TCP/IP network environment.
When this option is selected, the print system changes to browse master, and a workgroup is
created in My Network. When the option is not selected, the print system is added to an existing
workgroup.
The printer/MFP name is interrelated with the host name configured at TCP/IP setting page
(Protocols > TCP/IP > TCP/IP). If you want to change the NetBEUI printer/MFP name, change the
TCP/IP host name.
The printing workgroup is a workgroup shown in Entire Network in My Network. The default
workgroup name is "KM-NetPrinters" or "NC-NetPrinters".
You can enter a comment as desired. This field can also be left blank.
Description
Choose whether SMTP protocol is used (On) or not (Off).
Page 12 of 22
10/2/2012