User Login; User Login Options - Kyocera FS-2100DN Driver Manual

User Login

User Login Options

Printer Driver
This option locks the current Multiple pages per sheet setting selected in
the Quick Print or Layout tab. The Pages per sheet option is not locked.
Clicking the icon in the Quick Print tab, or the selection in the Layout tab,
switches between the two-page and four-page options. In the Layout tab, all
options are available and not limited to two-page and four page.
Profile with application
This option locks a defined profile of driver settings by application.
Job tab
This option locks settings selected in the Job tab.
Security settings
This option locks the Security Watermark in the Advanced tab. Security
Watermark is an optional plug-in.
Password settings
The password set by the administrator temporarily unlocks driver features. It
prompts the user for a password. When the administrator sets the password,
the Unlock button appears in the driver tabs or the Application Based
Printing dialog box. To unlock a feature, click Unlock and type the
password.
Note: Some models do not support User login.
User login provides job restriction by user, in contrast to the Job accounting
feature, which assigns privileges by division or department. User IDs and
passwords can be stored in the printer driver for use with multiple printing
systems.
User login adds users with a user name and password. The user name can
be in user principal name (UPN) format: username@domain.com. The UPN
format supports multiple domains. The UPN format is not needed if the default
domain registered in the device is used.
This feature limits printing privileges to specified users for secure printing and
accounting. The number of pages printed by each user will be tracked by the
printing system.
Users added in the printer driver must also be manually registered at the
printing system's operation panel.
User login settings selected in the driver are applied to every print job sent from
your computer.
Use specific name
This option can be used to specify a name and password to use the same
User login for every print job. If this option is selected, the user does not
have to type the name and password for each print job.
A client computer in a client/server environment can accept the default name
and password set by the administrator or type another name and password.
Clicking Reset restores the default values.
Prompt for name
This option prompts the user for a name and password. You can use a name
that is not on the list, and the name is not added to the list. When sending a
print job, type a name and password when prompted, then click OK to print.
Device Settings
2-8