Installing The Driver Locally - Dell B1160 User Manual

Installing the driver locally

A locally connected machine is a machine directly attached to your computer
using the cable.
• If you are a Macintosh or Linux OS user, refer to the "Software
Installation" on page 70.
• The installation window in this
machine and interface in use.
• Selecting Custom Installation
install.
• Only use a USB cable no longer than 3 meters (118 inches).
12
Windows
1 Make sure that the machine is connected to your computer and
powered on.
If the "Found New Hardware Wizard" appears during the installation
procedure, click Cancel to close the window.
User's Guide may differ depending on the
allows you to choose which programs to
2 Insert the supplied software CD into your CD-ROM drive.
The software CD should automatically run and an installation window
will appear.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing "X" with the letter, which represents your CD-
ROM drive and click OK.
Select Next.
3
Your printer driver installation window that appears in this User's Guide may
differ depending on the printer in use.
18
1. Introduction