Download  Print this page

Printing Problems - Dell B1160 User Manual

Document.
Hide thumbs

Advertisement

Table of Contents

Printing problems

Condition
The machine does not
The machine is not receiving power.
print.
The machine is not selected as the default
machine.
Check the machine for the following:
• The top cover is not closed. Close the top cover.
• Paper is jammed. Clear the paper jam (see "Clearing paper jams" on page 50).
• No paper is loaded. Load paper (see"Loading paper in the tray" on page 24).
• The toner cartridge is not installed. Install the toner cartridge (see "Replacing the toner cartridge" on page 40).
• Make sure the protect cover and sheets are removed from the toner cartridge (see "Replacing the toner cartridge" on page 40).
If a system error occurs, contact your service representative.
The connection cable between the computer and
the machine is not connected properly.
The connection cable between the computer and
the machine is defective.
The port setting is incorrect.
The machine may be configured incorrectly.
Possible cause
Suggested solutions
Connect the machine to the electricity supply first and press the
button on the control panel.
Select your machine as your default machine in Windows.
Disconnect the machine cable and reconnect it (see "Rear view" on page 15).
If possible, attach the cable to another computer that is working properly and print a job.
You can also try using a different machine cable.
Check the Windows printer settings to make sure that the print job is sent to the correct
port. If the computer has more than one port, make sure that the machine is attached to
the correct one.
Check the Printing Preferences to ensure that all of the print settings are correct.
(power/cancel)
136
5. Troubleshooting

Advertisement

Table of Contents

   Also See for Dell B1160

   Related Manuals for Dell B1160

This manual is also suitable for:

B1160w

Comments to this Manuals

Symbols: 0
Latest comments:
  • david worthy Aug 09, 2014 04:39:
    Fine, but what do I do if the paper cockles at the bottom as it comes out?
    DW