Adjust The Picture And Sound Quality; Adjust The Picture For Your Room Lighting - Pioneer PDP-5020FD - 1080p KURO Plasma HDTV Operating Instructions Manual

Basic Operations For Television Viewing
03
The SLEEP indicator on the front of the flat panel TV lights orange when the Sleep Timer is set. To check the
remaining time, press TOOLS then select Sleep. "Remain ---min" appears at the top of the menu screen. After
checking the time, press EXIT to return to your program without losing the Sleep Timer setting.
Note: When the sleep timer has been set, "Remain ---min" appears at the top of the menu. However, the Video
Pattern timer has priority over the sleep timer. When the Video Pattern timer is on, the sleep timer is
deactivated. Video Pattern is explained fully later in this manual.

3.4 Adjust the Picture and Sound Quality

Your flat panel TV has many adjustment options for the picture and the sound to make it just right for you. This
section provides basic adjustments but for detailed video/audio modifications, refer to "4 Additional Picture and
Sound Adjustment Options" and "4.7 Select Alternatives for/to Sound."

3.4.1 Adjust the Picture for Your Room Lighting

The flat panel TV senses the amount of light in your room and automatically adjusts the screen brightness for the
best picture. Bright rooms require stronger coloring so images appear crisp while dimly lit rooms allow the
picture to use more subtle coloring.
The panel ships with the Room Light Sensor turned Off. The sections below provide directions to turn the room
lighting sensor On/Off.
Room Lighting Sensor
To deactivate/reactivate the room lighting sensor, follow the steps below.
1 ) Access the
2 ) Select
3 ) Select
4 ) Press HOME MENU to exit the menu.
42
En
Option Setup
through the
Room Light Sensor
from the Option menu.
On Off
(or ) from the submenu.
Game Control Pref
Room Light Sensor
Screen Protection
Label Input
.
: Off
: Off