Pioneer PDP-5020FD - 1080p KURO Plasma HDTV Operating Instructions Manual page 21

Install Your Flat Panel TV
Speaker
mounting screw
(M5 x 10 mm)
Speaker bracket (right)
• Before connecting the speaker to the flat panel TV, unplug
• Do not leave speaker cable wires bare and exposed at the
• Do not connect any devices to the speaker terminals other
PDP-6020FD with the speaker installed
Gray
Black
Black
Red
Speaker mounting
screw (M5 x 10 mm)
Speaker cable
Speaker bracket (center)
the panel from the power outlet. Connecting the speaker
cable with the power cord plugged in can cause malfunction
or damage to the panel if the cable's bare wire touches other
equipment. Plug in the power cord after connecting the
speaker.
terminals. Exposed wires can result in an electrical short
causing malfunction or damage to the system.
than the speakers specified.
Speaker
mounting screw
(M5 x 10 mm)
Speaker
Speaker bracket (left)
Cable clamp
(PDP-5020FD)
02
21
En