Selecting The Sound Effect; Customizing The Sound Settings; Adjusting The Volume Automatically - Pioneer PDP-5016HD Operating Instructions Manual

09 Adjustments and Settings

Selecting the Sound Effect

You can select the sound effect to be used.
1
Press the MENU button.
2 Press the c or d button to move to Sound, then press
the OK button.
3 Press the c or d button to move to Effect.
4 Press the b or a button to select the required sound
effect as follows:
Flat - Speech - Movie - Music - User
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out
Item
Flat
Speech
Movie
(factory default)
Music
User
5
Press the EXIT button.
• You can select the modes by simply pressing the SOUND EFFECT
button on the remote control.
34
En
Movie
50
50
R1
Off
On
PCM
Description
Flat and pure sound
Suitable for the programs with speech,
such as News, etc.
You can enjoy sound effects like in a
movie theater.
Suitable for music programs
Allows the user to customize the setting
as desired.

Customizing the Sound Settings

This Plasma Display has several setting options that allow you
to control the sound quality.
1
Press the MENU button.
2 Press the c or d button to move to Sound, then press
the OK button.
3 Press the c or d button to select the required option
(Bass, Treble, or Balance).
4
Press the b or a button until you reach the optimal
setting.
Bass: 0~100
Treble: 0~100
Balance: L50~0~R50
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out PCM
| button
Item
Bass For weaker bass
Treble For weaker treble
Balance Decreases audio from Decreases audio from
the right speaker.
5
Press the EXIT button.
• If you make any adjustment to the "Bass" or "Treble", the "Effect" is
automatically switched to "User".

Adjusting the Volume Automatically

This feature allows you to automatically adjust the volume of
every channel by lowering the sound output when the
modulation signal is high or by raising the sound output when
the modulation signal is low.
1
Press the MENU button.
2 Press the c or d button to move to Sound, then press
the OK button.
3 Press the c or d button to move to Auto Volume Level.
4 Press the b or a button to select the required option (On
or Off).
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out PCM
• The factory default is "Off".
5
Press the EXIT button.
Flat
50
50
R1
Off
On
\ button
For stronger bass
For stronger treble
the left speaker.
Flat
50
50
R1
Off
On