Connecting The Power Cord - Pioneer PDP-5016HD Operating Instructions Manual

Preparation

Connecting the power cord

Connect the power cord after all component connections are completed.
Plasma Display (rear view)
• Use only the supplied power cord.
• Be sure to use the specified power supply voltage;
neglecting this can result in fire or electric shock.
• For the Plasma Display, a three-core power cord with a
ground terminal is used for efficiency protection.
Always connect the power cord to a three-pronged
outlet and make sure that the cord is properly grounded.
• Always turn off the power of the Plasma Display when connecting
the power cord.
• Disconnect the power cord from the power outlet when the Plasma
Display is not going to be used for a long period of time.
05
Power cord
17
En