Setting The Surround Sound; Setting Up External Digital Sound; Changing The Screen Size - Pioneer PDP-5016HD Operating Instructions Manual

Adjustments and Settings

Setting the Surround Sound

You can enjoy the virtual surround sound effect.
1
Press the MENU button.
2 Press the c or d button to move to Sound, then press
the OK button.
3 Press the c or d button to move to SRS TruSurround XT.
4 Press the b or a button to select the required option (On
or Off).
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out PCM
5
Press the EXIT button.
is a trademark of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS Labs, Inc.

Setting up External Digital Sound

You can enjoy the Dolby Digital* sound effect with the DIGITAL
OUT connected to an external digital audio decoder.
1
Press the MENU button.
2 Press the c or d button to move to Sound, then press
the OK button.
3 Press the c or d button to move to Digital Audio Out.
4 Press the b or a button to select the required option
(PCM or Dolby Digital).
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out PCM
Item Description
PCM (factory Always the sound is output in the PCM
default) format regardless of the types of signals.
Dolby Digital For Dolby Digital encoded signals, the sound
is output in the Dolby Digital format. For
PCM encoded signals, the sound is output in
the PCM format.
5
Press the EXIT button.
• This setting is effective only for the signal of digital TV when you
select DIGITAL CH.
* Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
Flat
50
50
R1
Off
On
Flat
50
50
R1
Off
On

Changing the Screen Size

In single-screen mode, you can change the screen size from
among the selectable options for the type of video signals
currently received.
• The selectable screen sizes differ depending on the types of
input signals.
1
Press the MENU button.
2 Press the c or d button to move to Screen, then press
the OK button.
3 Press the c or d button to move to Screen Size.
4 Press the b or a button to select the required aspect
ratio as follows:
Zoom - Cinema - Full - 4:3 - Wide
Screen
Screen Size
PIP/TWIN
Screen Saver
Full
Cinema
Item Description
Zoom For 16:9 letterbox pictures. Bars may appear
on the top and bottom on some programs.
Cinema For 14:9 letterbox pictures. Bars may appear
on the top and bottom on some programs.
Full (factory For 16:9 squeezed pictures
default)
4:3 For 4:3 "standard" pictures. A side bar
appears on each side.
Wide In this mode pictures are progressively
stretched toward each side of the screen.
5
Press the EXIT button.
• It is not recommended to consistently display signals that do not
completely fill the screen. This may cause temporary or permanent
image retention depending on the frequency and duration.
• You can select the modes by simply pressing the SCREEN SIZE
button on the remote control.
• Some HD broadcasts may display 4:3 content with side masks, which
may cause uneven wear. After viewing, it is recommended to view full
screen motion video.
Full
4:3
Wide
Zoom
09
35
En