Switching The Warning Tone; Switching The Auxiliary Setting; Correcting Distorted Sound; Switching The Sound Muting/Attenuation - Pioneer AVH-P7550DVD Operation Manual

Section
16 Initial Settings

Switching the warning tone

If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Touch A.MENU and INITIAL and then
touch DETACH WARNING.
2 Touch a to turn warning tone on.
# To turn warning tone off, touch b.

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Touch A.MENU and INITIAL and then
touch AUX.
2 Touch a to turn auxiliary setting on.
# To turn auxiliary setting off, touch b.

Correcting distorted sound

You can minimize distortion likely caused by
the equalizer curve settings.
Setting an equalizer level high can cause dis
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set
ting at HIGH to ensure quality sound.
1 Touch A.MENU and INITIAL and then
touch DIGITAL ATT.
2 Touch either of the following touch
panel keys to select the digital attenuator
setting.
! HIGH  High quality sound
82
En
! LOW  Minimize distortion sound
Switching the sound
muting/attenuation
Sound from this system is muted or attenu
ated automatically when a call is made or re
ceived using a cellular telephone connected to
this unit.
! The sound is turned off, MUTE is displayed
and no audio adjustments are possible.
! The sound is attenuated, ATT is displayed
and no audio adjustments, except volume
control, are possible.
! Operation returns to normal when the
phone connection is ended.
1 Touch A.MENU and INITIAL and then
touch TEL/GUIDE.
2 Touch any of the following touch panel
keys to select the desired setting.
! MIXING  Mixing
! ATT 10dB  Attenuation
! ATT 20dB  Attenuation (ATT 20dB has a
stronger effect than ATT 10dB)
! MUTE  Muting
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
1 Touch A.MENU and INITIAL and then
touch NEXT.