Kyocera KM-2540 Setup Manual page 15

IMPORTANT: If the domain name in [Login User Name] matches the name of computer in [Host Name], the
destination computer is not used in the domain environment.
In this case, enter the user name only in [Login User Name].
Host Name: pc4050
Path: scannerdata
Login User Name: pc4050\james.smith
Login Password: Password to be entered
NOTE: If the Cannot connect message appears, check the details you entered. If they are correct, refer to the
Troubleshooting on Page 15.
NOTE: Adding destinations to the address book enables you to select them later. To add a destination to the
address book, enter it and press [Add to Addr Book]. For how to add destinations to the address book, refer to
the Operation Guide.
Ready to send.
Place original.
Folder Path Entry
SMB Host Name
pc4050
Path
FTP
scannerdata
Login
pc4050\ james.smith
User Name
Login
Password
Specify the folder on the destination
computer.
Add to Addr Book Next Dest. Cancel
Status
when logging in to the
domain
Ready to send.
Place original.
Folder Path Entry
SMB Host Name
pc4050
Path
FTP scannerdata
Login
abcdnet\ james.smith
User Name
Login
Password
Specify the folder on the destination
computer.
Add to Addr Book Next Dest.
Status
Ready to send.
Destination
1
Place original.
Folder Path Entry
SMB Host Name
Path
FTP
Login
User Name
Login
Password
Connection
Test
OK Add to Addr Book
10/10/2008 10:10
Status
Host Name: pc4050
Path: scannerdata
Login User Name: james.smith
Login Password: Password to be entered
4
After completion of all entries, press [Connection
Test] to check the connection. When the
connection is successfully established, Connected.
is displayed.
Destination
1
Add to Addr Book
Connection
Test
Cancel OK
10/10/2008 10:10
Destination
1
pc4050
scannerdata
james.smith
Specify the folder on the destination
computer.
Connection
Test
Next Dest. Cancel OK
10/10/2008 10:10
when logging in to the
domain
13