Cmos Clear Header - Intel BLKDG43GT Technical Product Specification

Intel Desktop Board DG43GT Technical Product Specification
2.4

CMOS Clear Header

Figure 15 shows the location of the CMOS Clear header. In order to initiate a CMOS
clear, a jumper (not included) must be connected to the jumper block pins for at least
two seconds. A CMOS clear can be initiated regardless of the AC power state.
CAUTION
Initiating a CMOS clear when the board is powered on (S0 mode) or in standby (S1 or
S3 mode) may damage the board.
58
Figure 15. CMOS Clear Header