Intel Desktop Board DG43GT Technical Product Specification
1.10.4
Intel
Intel Remote Wake Technology (Intel RWT) enables home PCs, enabled services, and
mobile devices to communicate with one another remotely over the Internet, for 24/7
access while maintaining PC energy efficiency. Built on the Intel Management Engine,
Intel RWT allows you to remotely wake up home PCs from an enabled Internet
application or service, while in energy efficient sleep mode. This unique feature
enhances mobility with remote media access and downloads, Instant Messaging (IM),
and Voice over IP (VoIP)
NOTE
Intel RWT requires the system to be connected to the internet via a router and
ethernet cable. It also requires third party applications and services enabled for Intel®
RWT.
For information about
Intel Remote Wake Technology
1.11 Hardware Management Subsystem
The hardware management features enable the board to be compatible with the Wired
for Management (WfM) specification. The board has several hardware management
features, including the following:
•
Fan monitoring and control
•
Thermal and voltage monitoring
•
Chassis intrusion detection
1.11.1
Hardware Monitoring and Fan Control
The features of the hardware monitoring and fan control include:
•
Intel Quiet System Technology, delivering acoustically-optimized thermal
management
•
Fan speed control controllers and sensors integrated into the ICH10
•
Remote thermal diode sensor for ambient temperature sensing
•
Thermal sensors in the processor, 82G43 GMCH, and 82801JIB ICH10
•
Power supply monitoring of five voltages (+5 V, +12 V, +3.3 V, +1.125 V, and
+VCCP) to detect levels above or below acceptable values
•
Thermally monitored closed-loop fan control, for all three fans, that can adjust the
fan speed according to thermal conditions
30
®
Remote Wake Technology
Refer to
http://www.intel.com/technology/chipset/remotewake.htm