Table of Contents
Advertisement
1.12.2.9
Wake from Serial Port
Serial port activity wakes the computer from an ACPI S1 or S3 state.
1.12.2.10 +5 V Standby Power Indicator LED
The +5 V standby power indicator LED shows that power is still present even when the
computer appears to be off. Figure 7 shows the location of the standby power
indicator LED.
CAUTION
If AC power has been switched off and the standby power indicator is still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
Figure 7. Location of the Standby Power Indicator LED
1.12.3
ENERGY STAR*, E-Standby, and EuP Compliance
The US Department of Energy and the US Environmental Protection Agency have
continually revised the ENERGY STAR requirements. Intel has worked directly with
these two governmental agencies in the definition of new requirements.
Intel Desktop Board D945GSEJT also meets the following international program
requirements:
•
Korea E-Standby
•
European Union EuP
For information about
ENERGY STAR requirements and recommended configurations
Product Description
Refer to
http://www.intel.com/go/energystar
39
Advertisement
Table of Contents
