Using Push 'N' Connect (Wps) To Configure Your Wireless Network - NETGEAR WNR1000v3 - Wireless- N Router Setup Manual

Check that the wireless adapter on each computer can support the mode and security option
2.
that you selected. (If you have a question, see the online User Manual or review the settings
you selected in "Setting Your SSID and Wireless Security" on page
Check that the security settings on each wireless device match the security settings of the
3.
router. For example, if you selected a security option requiring a passphrase, then the same
passphrase must be used for each wireless computer.
Check that each wireless computer has a wireless link and is able to obtain an IP address by
4.
DHCP from the router.
For a Windows PC, go to the Control Panel and select Network Connections.
Check the Wireless Connections Properties and ensure that TCP/IP Properties
are set to Obtain an IP address automatically.
To access the Internet from any computer connected to your wireless router, launch a browser such
as Microsoft Internet Explorer or Mozilla Firefox. You should see the wireless router's Internet
LED blink, indicating communication to the ISP.
Using Push 'N' Connect (WPS) to Configure Your Wireless
Network
If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to connect
the wireless client securely and easily to the router. Look for the
device. 1
NETGEAR's Push 'N' Connect feature is based on the Wi-Fi Protected Setup
(WPS) standard. All other Wi-Fi-certified and WPS-capable products should be
compatible with NETGEAR products that implement Push 'N' Connect.
1. For a list of other Wi-Fi-certified products available from NETGEAR, go to
Configuring Your Wireless Network
21).
symbol on your client
.
http://www.wi-fi.org
22