Others; Connecting Portable Audio Players To The Aux Jack; Switching The Aux Mode On And Off - Eclipse CD1200 Owner's Manual

About optional unit

Others

About optional unit
Connecting portable audio
players to the AUX jack
Use a commonly available accessory cable with
the RCA connector to connect a portable audio
player to the AUX (auxiliary) jack of this system.
The default setting for AUX is OFF.
Turn on the portable audio player
1 1
and start its play function.
The AUX mode is activated.
For details, refer to "Switching Audio
Modes" on page 14.
ATTENTION
• While the AUX mode is activated, actions
such as turning off the audio player or
pulling out the connection cord may cause
noise spikes that can damage the system
speakers. Be sure to avoid this possibility
by turning off system power or switching
from AUX mode to another mode before
shutting off or disconnecting the portable
audio player.
• Audio output levels will differ for the various
devices that can be connected by this
method. Carefully adjust volume until the
output level of the connected player is
known.
• Before using a portable audio player in a
vehicle, read the player's operation manual
carefully and
operation in the vehicle before proceeding.
44
confirm problem-free

Switching the AUX mode on and off

1 1
Press the [FUNCTION] button.
The function mode is activated.
Press the [SELECT] button to
2
select the AUX ON/OFF.
The AUX ON/OFF mode is activated.
Turn the [VOL] button to select the
3
ON/OFF mode.
It switches between ON and OFF each
time the button is turned.
The selected settings will take effect.