If You Have A Question; Displayed Information (For Troubleshooting) - Eclipse CD1200 Owner's Manual

If you have a question:

Other information
First check the item mentioned below before attempting to troubleshoot problems.
2 1
CAUTION
When the front panel is removed, the reset button will be visible on the main unit.
If a problem occurs, for instance when the main unit does not respond to any button presses, or the
display doesn't work correctly, press the [RESET] button using a paper clip or similar item.
Pressing the [RESET] button will delete all the entries from memory. The settings will return to
those made at the factory prior to shipment.

Displayed information (for troubleshooting)

The information listed in the chart below is displayed to show the status of the CD, USB memory and
iPod. Refer to the chart for the appropriate action.
Information Contents
NO FILE
NO USB
COM ERR
NO iPod
READING...
NO DATA
ERROR1
ERROR2
IF THERE ARE NO FILES
IN THE CD-R OR USB
MEMORY
IF NO USB MEMORY IS
INSERTED OR THE
MEMORY IS NOT
COMPATIBLE
iPod IS NOT CONNECTED
iPod IS SENDING DATA
THERE ARE NO MUSIC
FILES STORED IN iPod
iPod STOPPED SENDING
DATA FOR SOME REASON
iPod SOFTWARE NOT
SUPPORTED
If you have a question:
Explanation and remedial action to take
Confirm the file.
• Confirm connection with USB memory.
• Confirm USB memory standards.
If this condition persists, please contact your dealer.
Make sure iPod is connected correctly.
Wait until the message disappears before operating.
Check files in iPod.
Check connection with iPod.
Check iPod software.
XI
XII
45