Listening To Music Files In Usb Memory; Searching For A Music File - Eclipse CD1200 Owner's Manual

Listening to music files in USB
memory
Connect a USB memory using the
1 1
USB connector.
2 2
Switch to the USB mode.
For details, refer to "Switching Audio
Modes" on page 14.
3 3
Operate the USB music file player.
The procedure for playing music is the
same as that are used to play CDs.
Refer to "How to operate the CD/MP3/
WMA/AAC player" (page 22 - 25).
ATTENTION
If the USB mode is changed to another mode
and then returned to the USB mode, the player
will return to the previous file played.
1 2
CAUTION
• Do not disconnect the USB memory or turn
the ignition key to ACC OFF position while
accessing the USB memory. Doing so may
corrupt the data.
• Depending on the type connected, the USB
memory may not work in some cases.
• The USB memory does not support multi-
partition. Also, it does not support USB hub.
• It is highly recommended to back up your
data in case of accidental deletion.
• Install and use the USB device in a place
that provides safe operation of the vehicle.
• The music files under the copyright
protection cannot be played.
• When connecting a digital audio player to
the USB connector, additional USB
adaptors may be required.
How to operate the USB music file player

Searching for a music file

You can retrieve your desired track in Search
mode.
1 1
Press the [BAND/ASM] button.
:
The search mode is activated.
Press the [BAND/ASM] button to
2
select the search mode item.
:
Search mode items are selected in
the following order.
Track search
Character search
For Track or File Search
Turn the [VOL] button to select the
3
track number and file number.
Press and hold the [SELECT]
4
button.
Playback of the selected music file will
begin.
For Character Search
Turn the [VOL] button to select the
3
character.
4 Press the [SELECT] button briefly.
The selected
confirmed.
Repeat steps (3) and (4) to enter all
5
of the characters.
Press and hold the [SELECT]
6
button.
Playback of the selected music file will
begin.
→ →
File search
character will be
29
V