Removing From Carton; Loose Parts - Craftsman 88690 - 250cc 28" Path Two Stage Snow Thrower Operator's Manual

NOTE:References to rightor left sideof the snowthrowerare
determined from behindthe unit in the operatingposition(standing
directlybehindthe snow thrower,facingthe handlepanel).
REMOVING FROM CARTON
1. Cut the cornersof thecarton and lay the sidesflat on the ground.
Removeand discard all packinginserts.
2. Movethe snowthrowerout of thecarton.
3. Makecertainthe carton has beencompletelyemptiedbefore
discardingit.
LOOSE PARTS
Tworeplacementaugershearpinsare includedwith this manual.Refer
to ReplacingShear Pinsin the Operationsectionfor moreinformation
regardingshearpin replacement.
ASSEMBLY
1. Placethe shiftleverin the Forward-6position.
2. Observethe lowerreararea of the snowthrowerto be sure both
cablesare alignedwith rollerguidesbeforepivotingthe handle
upward.See Figure1.
Figure1
NOTE:Makecertainthe upperends of eachcableare seatedproperly
in its bracket.
.
Securethehandle bytighteningthe plasticwing knoblocatedon
boththe left and rightsides of the handle.See Figure2. Remove
and discardany rubberbands,if present.They are for packaging
purposesonly.
f
!
/
/
/
Figure2
8