Clearing Paper Jams; In The Tray 1 - Samsung SCX-6545NX Series User Manual

5. Close the white document background and the scanner lid. Then load
the removed pages back into the DADF.

CLEARING PAPER JAMS

When a paper jam occurs, the warming message appears on the display
screen. Refer to the table below to locate and clear the paper jam.
MESSAGE LOCATION OF JAM
Paper Jam in tray 1, In the paper feed area
(tray 1, optional tray, or
Paper Jam in tray 2,
multi-purpose tray)
Paper Jam in tray 2
(HCF),
Paper Jam in tray 3,
Paper Jam in tray 3
(HCF),
Paper Jam in tray 4,
Paper Jam in MP
tray
Paper Jam in exit In the fuser area or
around the toner
area
cartridge
Paper Jam inside of In the paper exit area
machine
Paper Jam at the In the duplex unit
bottom of duplex
path,
Paper Jam at the
top of duplex path,
Paper Jam inside of
duplex path
Paper jam in front of In the stacker unit
finisher
Paper jam inside In the stacker unit
finisher, Paper jam
inside finisher's
duplex
Paper jam at exit of In the stacker unit
finisher
To avoid tearing the paper, pull the jammed paper out gently and
slowly. Follow the instructions in the following sections to clear the
jam.
GO TO
See "In the multi-
purpose tray" on
page 95.
See "In the optional
tray" on page 92.
See "In the optional
high capacity
feeder" on page 93.
See "In the fuser area
or around the toner
cartridge" on page 95.
See "In the paper exit
area" on page 95.
See "In the duplex unit
area" on page 96.
See "Paper jam in front
of finisher" on page 96.
See "Paper jam inside
finisher, Paper jam
inside finisher's
duplex" on page 96.
See "Paper jam at exit
of finisher" on page 97.
91

In the tray 1

1. Pull out the paper tray to open. After you pull it out completely, lift the
front part of the tray up slightly to release the tray from the machine.
2. Remove the jammed paper by gently pulling it straight out.
Once you remove the jammed paper here, open the side cover and then
close it to clear the error message on the display.
If there is any resistance, and the paper does not move immediately when
you pull, stop pulling. Then:
3. Open the side cover.