Samsung SCX-6545NX Series User Manual page 99

MESSAGE MEANING
Paper Jam in tray 1 Paper misfed from
tray
Paper Jam in tray 2 Or paper has jammed
in the tray feed area.
Or the tray cover is
Paper Jam in tray 2
opened.
(HCF)
Paper Jam in tray 3
Paper Jam in tray 3
(HCF)
Paper Jam in tray 4
Paper jam inside Paper jammed in the
stacker.
finisher's duplex
Paper Jam inside of Paper has jammed
during duplex printing.
duplex path
Paper Jam inside of Paper has jammed in
the registration area.
machine
Scanner locking The CCD (Charged
Couple Device) lock
switch is locked or
has been locked. The
another problem
CCD does not detect
occurred
its home location or
move.
Shake toner The toner supply is
low.
cartridge
Staple cartridge is Stapler is run out.
empty. Replace it
Staple cartridge is The staple cartridge is
not installed.
not installed. Install
it in finisher
SUGGESTED
SOLUTIONS
Clear the jam. (See "In
the tray 1" on page 91
and see "In the optional
tray" on page 92 and
see "In the optional
high capacity
feeder" on page 93)
Open the stacker door
and remove jammed
paper by lowering
guide 1a or 1b.
Clear the jam. (See "In
the duplex unit area" on
page 96.)
Clear the jam. (See "In
the paper exit area" on
page 95.)
Unlock the CCD lock.
(See "Front view" on
page 18.) Or turn off
the machine and on
again. Try again. If the
problem persists, call
for service.
Thoroughly roll the new
cartridge five or six
times to distribute the
toner evenly inside the
cartridge.
Order Staple Cartridge.
(See "Staple
Cartridge" on
page 110.) And replace
it. (See "Replacing the
Stapler" on page 113.)
Install the staple
cartridge following the
steps explained on the
back of the finisher
door. (See "Staple
Cartridge" on
page 110.) If you want
to continue the print job
and disregard of this
error message, go to
Admin Setting to
adjust the option. (See
"General settings" on
page 76.)
99
MESSAGE MEANING
System error: [zzz]. There is a problem in
the system operation.
Please turn off then
on
This IP address The IP address is
used in other place
conflicts with an IP
elsewhere.
address already in
use. Check it
Toner cartridge is The toner cartridge
you have installed is
not compatible.
not for your machine.
Check user's guide
Toner cartridge is The toner cartridge is
not installed or the
not installed. Install
CRUM (Consumer
it
Replaceable Unit
Monitor) in the
cartridge is not
properly connected.
Replace with new The toner cartridge is
at the end of its life.
toner cartridge
When the toner
cartridge replacement
message appears on
the screen and if you
select Continue, this
message displays.
End of life, Replace The lifespan of the
toner cartridge which
with new toner
the arrow indicates is
cartridge
reached.
Prepare new toner The toner cartridge is
almost empty.
cartridge
Too much paper in The stacker is full of
printouts.
finisher stacker.
Remove printed
paper
Too much paper in The printed papers
are full on the output
output bin tray.
tray.
Remove printed
paper
Use Auxiliary The credit is not
enough to access the
Access
job according to
Foreign Device.
SUGGESTED
SOLUTIONS
Turn the machine off
and turn it on again. If
the problem persists,
please call for service.
Check the IP address
or obtain a new IP
address.
Install a Samsung-
genuine toner cartridge,
designed for your
machine.
Try to reinstall the toner
cartridge.
Rplace a toner
cartridge with a
Samsung-genuine
toner cartridge. (See
"Replacing the toner
cartridge" on page 85.)
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine
toner cartridge. (See
"Replacing the toner
cartridge" on page 85.)
Ensure a replacement
cartridge is in stock.
Remove printouts from
the stacker.
Remove printed outs
from the output tray.
Insert credit into the
Foreign Device.