Loading Paper; Loading Paper In Tray 1, Optional Tray Or Optional High Capacity Feeder - Samsung SCX-6545NX Series User Manual

2. After inserting paper into the tray, while pinching the paper width
guide as shown, move it toward the stack of paper until it lightly
touches the side of the stack. Do not press the guide too tightly to the
edge of the paper; the guide may bend the paper.
When you use legal-sized paper, you need to extend the length of the
tray.
3. Load the paper into the tray.
4. Place the tray into the machine.
5. Set the paper size from your computer.
• Do not push the paper width guides far enough to cause the
materials to warp.
• If you do not adjust the paper width guides, it may cause paper
jams.

LOADING PAPER

Loading paper in tray 1, optional tray or optional
high capacity feeder
Load the print media you use for the majority of your print jobs in the tray 1.
The tray 1 can hold a maximum of 500 sheets of 80 g/m
paper.
You can purchase an optional tray and attach it below the standard tray to
load an additional 500 sheets of paper. (See "Supplies" on page 110.)
Using photographic paper or coated paper may cause problems,
requiring repairs. Such repairs are not covered by Samsung's
warranty or service agreement.
1. To load paper, pull and open the paper tray and place paper with the
2
(20 lb bond) plain
2. After loading paper, set the paper type and size for the tray 1. See
39
side you want to print facing down.
Place the side to be printed facing up.
PREPRINTED
ENVELOPE
PUNCHED PAPER CARD STOCK
LABEL
"Setting the paper size and type" on page 41 for copying and faxing or
Software section for PC-printing.
• If you experience problems with paper feed, place one sheet at a
time in the multi-purpose tray.
• You can load previously printed paper. The printed side should be
facing up with an uncurled edge at the front. If you experience
problems with paper feed, turn the paper around. Note that print
quality is not guaranteed.
1 Full
2 Empty
TRANSPARENCY
PAPER
LETTERHEAD
PAPER