Drying Procedures - Electrolux GLEQ2152ES Use And Care Manual

Drying Procedures
Read tile Operating Instructions card for operating your specific model.
• Always read and follow fabric care labels and laundry product labels,
Follow fabric care label instructions,
To reduce the risk of fire, electrical shock, or injury to persons,
read Important Safety Instructions, pages 3-4, before operating this dryer.
Prepare items for drying.
• Dry items of similar fabric, weight and construction in the same load.
Separate dark items from light-colored items. Separate items that shed
lint from those that attract lint. If an item sheds lint, turn it inside out.
Be sure buckles, buttons and trim are heatproof and won't damage the
drum finish. Close zippers, fasten hooks and Velcro¢}qike fasteners.
Tie strings and sashes to prevent snagging and tangling.
If possible, turn pockets inside out for even drying.
Check for stains which may not have been removed in washing. Dryer
heat may permanently set some stains. Repeat stain removal process
before drying.
Place small items in a mesh bag to prevent tangling and for easy
removal.
.
: :,_, ,"e,,_, < 2, ¢. ,,> ;'S , _i;: _
e
@
Place small items in a mesh bag
Fill dryer drum 113 to 112 full
Check that tint screen is dean and in p_ace.
Load the dryer.
Tile average load will fill the drum 113to 112 full. Items need room to
tumble freely for even drying and less wrinkling. Do not overload
dryer.
When drying large items, dry only 2 or 3 at a time. Fill out the load with
small and medium sized items.
For delicate or very small loads, add 2 lint-free towels for better drying,
less wrinkling, and to prevent grease stains caused by fabric softener
sheets.
Do not overdry items. Overdrying can cause wrinkling, shrinkage,
harshness, and a build-up of static electricity, which can produce more
lint.
If desired, add a dryer fabric softener sheet.
4. C_ose the dryer door and select the cyde, temperature,
dryness _eve_ and options desired.
See Operating btstrucdons for your specific model information.
5.
Press START to begin the cycle,
To add or remove items when the dryer is running open the door. The
dryer will stop when the door is opened. Allow the drum to come to a
complete stop before reaching inside.
Close the door and press STARTto resume tile cycle.
6. When the cycle ends, remove items immediate#y and hang
or fold.