62
Getting Started
Using the TouchPad™
Disabling or enabling the TouchPad
The TouchPad is enabled by default. To change the enable/
disable TouchPad setting:
1
Click Start, and then click Control Panel.
The Control Panel window appears.
2
Click Printers and Other Hardware.
Click the Mouse icon.
3
4
Click the TouchPad On/Off tab.
The TouchPad On/Off tab view window appears.
(Sample Image) TouchPad On/Off screen
5
Select Disable or Enable, whichever is appropriate.
Click Apply.
6
7
Click OK.
The Mouse Properties window closes.
8
Close the Printers and Other Hardware window.
Close the Control Panel window.
9