Removing A Disc With The Computer Off; Caring For Cd Or Dvd Discs - Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz User Manual

Removing a disc with the computer off

Insert a slender object, such as a straightened paper clip,
1
into the manual eject hole.
The disc tray slides partially out of the drive (about
1 inch).
2 Pull the tray out until it is fully open, remove the disc,
and place it in its protective cover.
Gently push the tray in to close it.
3

Caring for CD or DVD Discs

Store your discs in their original containers to protect
them from scratches and keep them clean.
Do not bend a disc or place heavy objects on top of it.
Do not apply a label to, or otherwise mar the surface of, a
disc.
Hold a disc by its outside edge. Fingerprints on the
surface can prevent the optical drive from reading the
data properly.
Do not expose discs to direct sunlight or extreme heat or
cold.
To clean a disc that is dirty, wipe it with a clean, dry
cloth. The most efficient method to clean it is to start
from the center of the disc and wipe toward the outward
edge (not in a circle). If necessary, moisten the cloth with
water or a neutral cleaner (not benzine or rubbing
alcohol). Let the disc dry completely before inserting it in
the drive.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
Learning the Basics
Using the Optical drive
101