Disabling Or Enabling The Touchpad; Connecting An External Device; Using External Display Devices - Toshiba Satellite Pro Series User Manual

Disabling or enabling the touchpad

The touchpad is enabled by default. To enable/disable the
touchpad, press the (
"Disabling or enabling the touchpad" on page

Connecting an external device

NOTE
You can easily attach an external device to your computer.
To do this:
1 Read the directions that came with the device to see if
you first need to install new software.
2 Connect the device's video or USB cable to the port on
the computer and to the device.
3 Connect the device's power cable to a live electrical
outlet (if applicable).
4 Turn on the external device (if applicable).
Your computer may automatically detect the external
device.

Using external display devices

Your computer comes with a built-in display, but you can
also connect an HDMI™-compatible television or external
display device via the HDMI Out port*.
NOTE
(Sample Illustration) Video port on right side of computer
Using external display devices
Depending on your system, some models may include
USB 3.0 port(s). To distinguish these ports, please look
for the blue inset within the USB 3.0 port (if available).
To locate your HDMI Out port, please refer to your Quick
Start document.
HDMI Out port*
Getting Started
) key. For more information, see
*Available on certain models
55
164.