Directing The Display Output When You Turn On The Computer - Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz User Manual

64
Getting Started
Using external display devices

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
Press
1
2 While holding down
setting you want takes effect. Briefly pause between
pressing the
change.
This hot key cycles through the available settings in the
following order:
NOTE
3 Release the
and simultaneously.
Fn F5
key to allow time for the display to
F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Built-in display and TV
TV only
Only devices currently connected to the computer will be
displayed as available settings.
key.
Fn
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, Control
Panel, Appearance and Themes, and then click Display.
Choose the Settings tab, click the Advanced button, select
Display Device, select the applicable Monitor type, and click
Apply or OK.
, press repeatedly until the
Fn F5
+ ):
Fn F5