Setting Character Attributes; Setting Character Attributes By Label; Setting Character Attributes By Each Line - Brother P-touch PT-2030 User Manual

Setting Character Attributes by Label

Using the Text key, you can select a font and apply size, width, style, line, and
alignment attributes.
1
Press the Text key.
The current settings are displayed.
2
Select an attribute using the
using the or
3
Press the OK or Enter key to apply the settings.
New settings are NOT applied if you do not press the OK or Enter key.
• Press the Escape key to return to the previous step.
• Press the Space key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.
• Small characters may be difficult to read when certain styles are applied (e.g. Shadow + Italic).

Setting Character Attributes by Each Line

When a label consists two or more lines of text, you can set different value of
character attributes (font, size, width, style, line and alignment) for each line.
Move the cursor to the line you wish to change the
character attribute by using the
the Text key while holding down Shift key to display the
attributes. ( on the screen indicates that you are now
applying the attribute for that specific line only.)
When different value of attribute is set for each line, the value
will be displayed as **** when you press the Text key. When
you change the setting on this screen by using the
the same change will be applied to all lines of the label.

Setting Character Attributes

or
key.
or
key, and then set a value for that attribute
key. Next, press
or key,
Setting Character Attributes
1
2
3
4
5
6
7
8
9
25