Power Supply; Battery - Brother P-touch PT-2030 User Manual

GETTING STARTED

Battery

1
After making sure that the power is off, remove the
battery compartment cover on the back of the
machine. If the batteries are already in the
machine, remove them.
Make sure that the power is turned off when
replacing batteries.
2
Insert six new AA-size alkaline batteries (LR6),
making sure that the positive (+) and negative (-)
ends of the batteries match the positive (+) and
negative (-) marks inside the battery compartment.
23
Always replace all six batteries at the same
time using brand new ones.
3
Attach the battery compartment cover by inserting
the three hooks at the bottom into the slots on the
machine, then pushing down firmly until it snaps
into place.
• Remove the batteries if you do not intend to use the P-touch labeler for an extended period of
time.
14

Power Supply

Power Supply