Brother P-touch PT-2030 User Manual page 38

EDITING A LABEL
9
Enter the text and then press the OK or Enter key.
Repeat this for each text field.
After all text fields are entered, the print menu is
displayed when the OK or Enter key is pressed.
10
Select "Print" using the
the label.
• Select "Edit" to change the text data or style settings.
• Select "Save" to store the label in a file memory.
• Select "Cancel" to exit the Auto-Format function.
• Select "Print Options" to set the print settings.
• Press the Escape key to return to the previous step.
• On the Style and Bar Code Setup screens, press the Space key to change the selected attribute
to the default value.
• Refer to the Templates table for a list of available templates.
• To print multiple copies, sequentially numbered copies, or a mirror image of the label, with
the print menu displayed hold down the Shift key and press the Print key to display the Print
Options menu.
• If the width of the current tape cassette does not match the set width for the selected layout,
an error message is displayed when you try to print the label. Press the Escape key or any other
key to clear the error message, and insert a tape cassette of the correct width.
• If the number of characters entered exceeds the limit, "Text Too Long!" is displayed when the
OK or Enter key is pressed. Press the Escape key or any other key to clear the error message,
and edit the text using fewer characters.
Attribute
Template Name
32
Using Auto-Format Layouts
or key and then press the OK or Enter key to print
Templates
Value
Binder Spine
File Folder Tab
Divider Tab
(Hanging Folder)
Asset Tag
Details
(0.70" x 8.6" [18mm x 219mm])
(0.47" x 3.2" [12 mm x 82 mm])
(0.47" x 1.6" [12 mm x 42 mm])
(0.70" x 2.7" [18 mm x 70 mm])