Viewing Switch Information - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

3

Viewing switch information

Viewing switch information

Using EZSwitchSetup Switch Manager, you can view the following:
•
•
•
•
•
Perform the following steps to view switch information
1. Click View in the task panel under Switch.
2. Click the Switch Information tab to display the Switch View.
The Switch View is a real-time view of switch and port status. The display is updated approximately
once every 15 seconds. From the display you can determine the following:
•
•
•
•
Rectangles in the Fan, Temp, and Power buttons indicate overall status as follows:
•
•
•
•
30
Switch status, including port status.
Temperature, fan, and power supply status.
HBA and storage connections to the switch.
Information about devices connected to the switch.
Accessibility between HBAs and storage.
Figure 23 displays the Switch View for a Brocade 200E switch.
FIGURE 23
Graphical View of Switch
Fan status
Temperature status
Power supply status
Status and type of each port
Green square (healthy)
Orange forward slash (marginal)
Red X (critical)
Gray circle (unmonitored)
EZSwitchSetup Administrator's Guide
53-1001193-02