Ezswitchsetup Limitations; In This Appendix; General Limitations - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

EZSwitchSetup Limitations

In this appendix

General limitations

Table 3
TABLE 3
Problem Area
HTTP timeout
EZSwitchSetup Administrator's Guide
53-1001193-02
•
General limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
lists general EZSwitchSetup limitations, which apply to all browsers and switch platforms.
EZSwitchSetup Switch Manager Limitations
Details
Very often, you may see the following message when you try to get data from a switch
or to send a request to the switch:
Failed to get switch response. Please verify the status
of your last operation and try again if necessary.
This indicates that an HTTP request did not get a response. The request was sent to
the switch, but the connection was down, probably caused by a temporary loss of the
Web server on the switch. Due to the nature of an HTTP connection, Switch Manager
will report this error after a 90-second default timeout.
In this case, verify the status of your last request, using Telnet to check related status,
or click the Refresh button in the Switch Manager to retrieve related data. If your
request did not get through to the switch, resubmit it. Executing a refresh from Switch
Manager retrieves a copy of switch data at that moment; the data you entered can be
lost if it had not already been committed to the switch.
Appendix
A
47