2
Installing and running the EZSwitchSetup wizard
4. Click OK to start the EZSwitchSetup Manager.
Switch discovery failure
During the setup of your switch, the switch discovery may fail. There may be several reasons why
switch discovery fails.
14
If you click Continue with EZManager, A warning dialog box displays warning you that
EZSwitchSetUp only supports single switch fabrics
FIGURE 12
Warning - only single switch fabric supported.
A browser window opens and loads, and the Switch Configuration Welcome screen is displayed
(Figure
13). This may take a few minutes.
If EZSetup does not launch, you must launch it manually by specifying the URL in a browser:
http://<switch-ip>
If the switch discovery fails, see
Table 2
Table 2
on page 15 for details on how to recover your switch.
lists symptoms and related suggestions to recover the switch.
(Figure
12).
EZSwitchSetup Administrator's Guide
53-1001193-02