Nodes Swapped With Another Switch Node; Lettering In Legend Unreadable When Printed; Links Do Not Reconfigure After Disruptive Failover; Nodes Overlap - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual
Brocade fabric manager administrator's guide v6.1.0 (53-10000610-02, june 2008)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
•
•
•
•
Nodes swapped with another switch node
Nodes are repositioned after expanding or collapsing link bundles in any of the topology layouts.
Sometimes the nodes are not only repositioned but also swapped with another switch node.
Lettering in legend unreadable when printed
When you print a topology layout in one page that does not originally fit the screen, the lettering in
the legend becomes too small to read.
To avoid this problem, zoom the Topology view so that it fits on the screen. Use the snapshot
feature to save the layout to a PNG graphics file. Then, using a graphics program or web browser,
print out the topology from one of these applications.
Links do not reconfigure after disruptive failover
Links sometimes do not reconfigure correctly in the core-edge topology mode after a disruptive HA
failover, causing them to be out of proportion.
Whenever the ISL links that connect to the nodes end up out of proportion, select any of the ISL link
styles and the topology layout issue is then corrected.
Nodes Overlap
If you move nodes and then redo the view in the tree layout, the nodes can sometimes overlap.
Additional problem areas
This section describes specific problems that you might experience with Fabric Manager. A solution
to the problem is included.
•
•
•
•
•
•
•
•
•
•
Fabric Manager Administrator's Guide
53-10000610-02
"Nodes swapped with another switch node"
"Lettering in legend unreadable when printed"
"Links do not reconfigure after disruptive failover"
"Nodes Overlap"
"Fabric Manager license key and serial number"
"Switches and hosts do not recognize HBA after firmware download to HBA"
"503 Service Unavailable/Overloaded error"
"Installation wizard"
on page 358
"Fabric Manager client does not start"
"Web Tools pages do not launch"
"Wizard hangs"
on page 360
"Performance monitoring"
"Fabric Manager database file is too large"
"Sequenced reboot does not show correct status"
on page 358
on page 358
on page 359
on page 360
on page 361
on page 361
on page 361
Additional problem areas
on page 358
A
357
Advertisement
Table of Contents
Troubleshooting
