Items Included With The Switch - Brocade Communications Systems 7840 Hardware Installation Manual

NOTE
A 50-micron cable should not be bent to a radius less than 2 in. under full tensile load and 1.2 in. with no tensile load. Tie
wraps are not recommended for optical cables because they are easily overtightened.

Items included with the switch

The following items are included with the standard shipment of the Brocade 7840:
• The Brocade 7840, containing two combined power supply FRUs with integral fans
• Three individual fan FRUs
• The following rack mount kits are available options:
– Fixed rack mount kit, with installation instructions
– Mid-mount kit, with installation instructions
• All Fibre Channel ports contain 16 Gbps SWL or LWL SFP transceivers
• One accessory kit, containing the following items:
– China-ROHS Hazardous/Toxic Substance Content Chart
– Documentation reference card (describes where to find relevant documentation)
– 24 16 G Brocade branded SWL or LWL SFPs, depending on the switch SKU ordered
– Network Advisor download insert
– Rubber mounting feet (to be used when setting up the Extension Switch as a standalone unit)
– Two grounded 6-ft. (approximately 1.83 m) power cords:
› Power plug type: NEMA5-15
› Power plug current/voltage rating: 15A/125V
› Cordage type: SJT
› Current rating/wire gauge: 13A/16AWG with a 105°C (221°F) temperature rating
› Connector at system end of cordset: IEC 60320/C13
› Two power cord retainers
– One RJ-45 serial cable (10 ft. or approximately 3 m.). The Extension Switch uses an RJ-45 connector for the console port.
An RJ-45 to DB-9 adapter is also provided with the switch.
Brocade 7840 Extension Switch Hardware Installation Guide
53-1003127-10
Items included with the switch
19