Managing The Rear Panel Cables - Compaq ProLiant CL380 User Manual

Managing the Rear Panel Cables

You are now ready to connect the power cord and peripheral devices to the
connectors located on the rear panel of the system. Icons on the back of the
system identify the function of each connector. The following procedure
provides instructions for connecting the external cables to the system and then
securing those cables to the rack, if necessary.
NOTE: KVM extension cables must be used when the ProLiant CL380 is installed in a
multiple system environment controlled by a KVM switchbox. For information on installing
the KVM extension cables, see Chapter 4, "Installing Hardware Options."
1. Plug the cables into the system shared storage area.
Figure 5-10. Plugging in shared storage cables
Cabling Guidelines 5-17
DE 1
ER NO
SE RV
DE 2
ER NO
SE RV