Bus Number
1
2
3
NOTE: The I/O expansion board slots are numbered from right to left as you face the front of the server.
I/O Expansion Slot Cover
To remove the I/O expansion slot cover:
1. Press down on the top of the expansion slot release lever
2. Remove the expansion slot cover
Figure 2-31. Removing the I/O expansion slot cover
Reverse steps 1 and 2 to replace the I/O expansion slot cover.
Bus Distribution of PCI Hot Plug Slots
Associated PCI Bus
PCI bus primary, 64 bit, 33 MHz
PCI bus secondary 64 bit, 33 MHz
PCI bus tertiary 64 bit, 66 MHz
1
2
Table 2-7
PCI Hot Plug Slot Number
Slots
Slots
Slots
.
3
Removal and Replacement Procedures 2-39
through
through
and
and push the lever up
.