System Unit - Compaq ProLiant 8500 Maintenance And Service Manual

3-12 Compaq ProLiant 8500 Server Maintenance and Service Guide
Table 3-2
POST Error Messages
Error Code
304-Keyboard or
System Unit Error
40X-Parallel Port X
Address Assignment
Conflict
404-Parallel Port
Address Conflict
Detected.
A hardware conflict
in your system is
keeping some
system components
from working
correctly. If you have
recently added new
hardware, remove it
to see if it is the
cause of the conflict.
Alternatively, use
Computer Setup or
your operating
system to ensure
that no conflicts
exist.
601-Diskette
Controller Error
602-Diskette Boot
Record Error
605-Diskette Drive
Type Error
continued
Audible Beeps Probable Source of Problem
None Keyboard, keyboard cable, or
system board failure occurred.
2 short Both external and internal ports
are assigned to parallel port X.
2 short A hardware conflict in your
system is preventing the parallel
port from working correctly.
None Diskette controller circuitry
failure occurred.
None The boot sector on the boot disk
is corrupt.
2 short Mismatch in drive type occurred.
Recommended Action
1. Make sure the keyboard is
attached.
2. Run Compaq Diagnostics
to determine which part is
in error.
3. Replace the part indicated.
Run the server setup utility to
correct the part assignment.
1. If you have recently added
new hardware, remove it
to see if the hardware is
the cause of the conflict.
2. Run your server setup
utility to reassign
resources for the parallel
port and manually resolve
the resource conflict.
3. Run Compaq Diagnostics
to resolve the issue.
1. Make sure the diskette
drive cables are attached.
2. Replace the diskette drive,
the cable, or both.
3. Research and replace
failed assembly as
indicated.
1. Remove diskette from the
diskette drive.
2. Replace diskette in drive.
3. Reformat diskette.
Run the server setup utility to
set diskette drive type correctly.
continued