HP 445860-B21 - 10Gb Ethernet BL-c Switch User Manual page 31

Setting
Port Trunking
Port Trunking Load Sharing
Algorithm
Port Mirroring-Mirror Status Disabled
Port Mirroring-Mirror Port
Port Mirroring-Mirror Port
Traffic Direction
Port Mirroring-Monitoring
Port
SNMP
SNMP System Name
SNMP System Location
SNMP System Contact
SNMP Community
String/Access Right
SNMP Trap Host 1
SNMP Trap Host 1
Community String
SNMP Trap Host 2
SNMP Trap Host 2
Community String
SNMP Authentication
Traps
SNMP Link Up/Down
Traps
Security IP Network/Mask
TFTP Server IP Address
TFTP Port Number
Firmware upgrade
Configuration file from
TFTP server
Configuration file to TFTP
server
PING tool
Trace Route tools
Serial Port Baud Rate
Value
Trunk group 1, enabled with port 17 and 18
The algorithm selects the following as forwarding ports for forwarding traffic:
1 For forwarding IP Packets—modulus of XOR of last 3 bits of source and last 3
bits of Destination IP address
2 For forwarding non-IP packets—modulus of XOR of last 3 bits of source and
last 3 bits of Destination MAC address
3 For forwarding broadcast, multicast packets, and unknown unicast packets—
the lowest active port number in the trunk group
None selected
None selected
None selected
Read/write
None
None
None
Public—read-only
Private—read/write
0.0.0.0
Public
0.0.0.0
Public
Disabled
Enabled
0.0.0.0 / 0.0.0.0
0.0.0.0
69
File name—none
File name—none
File name—none
Target address—undefined
Default tries—5
Target address—undefined
9600
Technical specifications 31