HP 445860-B21 - 10Gb Ethernet BL-c Switch User Manual page 41

Using the null modem cable, connect the console port of the switch to the serial port of a PC that
1.
supports XModem/1K XModem.
Start HyperTerminal (part of Microsoft Windows) or equivalent terminal emulation application
2.
(depending on the computer operating system) and set the parameters for terminal emulation
console:
Parameter Value
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
Power on the switch.
3.
Hold down the Shift key and press the D key repeatedly during the Memory Test, until this message
4.
appears:
NOTE: To perform serial downloads at 57600 baud rate, press the Shift-F keys. To perform
serial downloads at 115200 baud rate, press the Shift-D keys.
After the message in Step 4 appears, reconfigure the terminal emulation console using these
5.
parameters.
Parameter Value
Baud rate 115200
Performing a serial download 41