Laser Compliance - HP 445860-B21 - 10Gb Ethernet BL-c Switch User Manual

Laser Compliance

The transceiver is classified as a Class 1 Laser Product in accordance with US FDA regulations and the
IEC 60825-1. The product does not emit hazardous laser radiation.
Each laser product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated May 27, 2001; and with IEC 60825-1:1993/A2:2001.
WARNING:
specified herein or in the laser product's installation guide may result in hazardous radiation
exposure. To reduce the risk of exposure to hazardous radiation:
Do not try to open the module enclosure. There are no user-serviceable components inside.
•
Do not operate controls, make adjustments, or perform procedures to the laser device other
•
than those specified herein.
Allow only HP Authorized Service technicians to repair the unit.
•
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products on August 2, 1976. These regulations apply to laser products
manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.
Use of controls or adjustments or performance of procedures other than those
Regulatory compliance notices 27