OPERATOR SPECIFICATIONS
Carton Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
OPERATOR WARNINGS
WARNING
Manual Disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Install Vent Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Program Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Radio Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
Accessory Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-20
Friction Clutch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
Electrical Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
T A B L E O F C O N T E N T S
IMPORTANT NOTES
• BEFORE attempting to install, operate or maintain the operator,
• DO NOT attempt repair or service of your commercial door and
When you see these Safety Symbols and Signal Words on the
following pages, they will alert you to the possibility of SERIOUS
INJURY or DEATH if you do not comply with the warnings that
accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will
AVERTISSEMENT
alert you to the possibility of damage to your gate and/or the gate
operator if you do not comply with the cautionary statements that
accompany it. Read them carefully.
AVERTISSEMENT
AVERTISSEMENT
. . . . . . . . . . . . . . . . 40
2
you MUST read and fully understand this manual and follow all
safety instructions.
gate operator unless you are an Authorized Service Technician.
WARNING
WARNING
Mechanical
CAUTION
WARNING
WARNING
WARNING
Electrical
WARNING
CAUTION
CAUTION
CARTON INVENTORY
Before beginning your installation check that all components
were provided and received undamaged. Refer to list below
for factory provided parts.
HARDWARE KIT
SL585/SL595 (K77-34846)
DESCRIPTION
Safety Gate Brochure
Gate Bracket
Take-Up Bolt
Nickel Plated Chain #50
U-Bolt 2" 5/16-18
U-Bolt 3" 3/8-16
ADVERTENCIA
Square Head Set Screw 7/16"-14
Hex Nut 1/2-13
Flange Nut 5/16"-18
Flange Nut 3/8"-16
PRECAUCIÓN
Flat Washer 3/8"
ADVERTENCIA
Flat Washer 1/2"
ADVERTENCIA
Lock Washer 1/2"
Antenna
ADVERTENCIA
PRECAUCIÓN
AVERT
AVERT
AVERT
ATTEN
AVERT
AVER
ATTE
AVER
QTY.
1
2
2
1
4
4
4
4
8
8
8
4
4
1