Gvrp Port Settings - D-Link DGS-3048 - Switch Product Manual

Parameter
Forbidden
Click Apply to implement changes made.

GVRP Port Settings

In the L2 Futures menu, open the VLANs folder and click GVRP Settings.
This GVRP Settings window, shown below, allows you to determine whether the Switch will share its VLAN
configuration information with other GARP VLAN Registration Protocol (GVRP) enabled Switches. In addition, Ingress
Checking can be used to limit traffic by filtering incoming packets whose PVID does not match the PVID of the port.
Results can be seen in the table under the configuration settings, as seen below.
DGS-3048 Gigabit Ethernet Switch Manual
Description
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
53