Installing Rhe Roll Paper For Type B, D - Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Manual

3.3.2.1 Installing rhe Roll Paper for Type B, D

4. Close the roll paper cover.
3-8 Setup
1. Using scissors, cut the leading edge of
the roll paper, as shown in the left figure.
2. Turn on the printer and open the roll
paper cover by using the tab, as shown in
the left.
Tab
3. Insert the roll paper, as shown on the left.
Note the direction the paper comes off the
roll, as shown below.
When using 2-ply roll paper, be sure that the
top and bottom sheets are aligned at the paper
exit. See the below illustration.
Note:
Rev. D